Page 2270 - Week 06 - Thursday, 7 June 2018

2.2.4

issuing improper building approval—building work would contravene law because of external design or siting

2.2.3

failure to mark, attach or annotate building approval required detail on approved plan

2.2.2

failure to issue required building approval, or issue of unauthorised building approval

2.2.9

failure to notify registrar of known contravention of building approval or development approval

43(4)

Any other breach where a demerit ground is not identified

2.4.1

inadequate or no protection against direct contact with live parts

2.4.4

inadequate or no protection against fire spread

2.4.12

creation of switchboard in noncompliant location

2.4.13

creation of switchboard with protective device defect

2.4.14

creation of switchboard with isolating device defect

2.4.15

creation of switchboard with connective device defect

2.4.16

creation of switchboard with connection defect or fixing of wiring or switchgear defect

2.4.17

creation of switchboard with labelling identification defect or labelling electrical equipment defect

2.4.19

creation of wiring system with conductor size defect

2.4.20

creation of wiring system with cable core identification defect

2.4.21

creation of wiring system with inadequate or no support or fixing

2.4.22

creation of wiring system with connection or enclosure defect

2.4.25

failure to protect wiring system against external influence

2.4.26

creation of electrical equipment with defect in isolation or switching device for protection against injury from mechanical movement device or motor

2.4.28

creation of electrical equipment switching device noncompliant for particular electrical equipment

2.4.30

creation of electrical equipment noncompliant with Australian Standard

2.4.34

creation of defective earth electrode

2.4.35

creation of defective earthing conductor

2.4.41

creation of earthing system that failed earth continuity and resistance test under AS 3017

2.4.42

creation of wiring or installation that failed insulation resistance test under AS 3017

2.4.43

creation of wiring or installation that failed polarity test under AS 3017

2.4.46

creation of wiring or installation that failed RCD test under AS 3017

2.4.47

failure to test installation or give required test report

2.4.48

failure to comply with direction to make installation or work safe

2.8.5

failure to comply with applicable code of practice

43(4)

Any other breach where a demerit ground is not identified

55 1(b)

the licensee, knowingly or recklessly, gave someone information in relation to a construction service provided, or to be provided, by the licensee that was false or misleading in a material particular;